Swarm bee LE V3 - 2.4 GHz Chirp radio & sensor module

2.4 GHz Chirp radio & sensor module 
Stock: 6
Delivery time: please contact us for more information
Article number TOP: Swarm bee LE V3
Manufacturer / supplier: nanotron Technologies
Filter A: Frequency range: ISM-band 2.4 GHz, 2.400 - 2.4835
Filter B: Modulation: Chirp Spread Spectrum (CSS)
Filter C: Standard Package: 500pcs
Datasheet / URL: https://nanotron.com/EN/wp-content/uploads/2020/08/Inpixon_PB_swarm_bee_LE_V3_1.94.pdf

€ 75,00

Quantity 1+
Unit price€ 75,00

    Add to wish list
swarm bee LE V3 integrates nanotron’s location RF-Chip, nanoLOC, and is complemented with embedded accelerometer and temperature sensors. With low external component requirements, the swarm bee LE V3 is an ideal choice for personnel, equipment and asset tracking products, where in- and outdoor location sensing is critical.

swarm bee LE V3 based tags, when deployed with nanoANQ anchors and our IoT Platform, provide the most comprehensive real-time location system (RTLS) on the market today.

- Engage markets with a small footprint module – suiting wearables, asset tags or cap lamps
- Deliver higher performance applications by extending the range (+4dB RF Pout)
- Cut integration time with the tag ready swarm bee design

The swarm bee LE V3 is based upon the nanoLOC transceiver chipset. With a configurable transmission power output, the module is capable of radio range up to 1,000 m. Typical applications are 300 – 500 m. The increased output power further stabilizes the communication reliability and connection robustness.


RF standard - Chirp, 2.4 GHz, ISM band
RF frequency range- 2.4 to 2.4835 GHz, (80 MHz BW)
RF transfer rates - 1 Mbps 80/1, 250 Kbps 80/4
RF output power - Configurable, -12 to +20 dBm
RF sensitivity - 80/1 mode: -89 dBm typ.
80/4 mode: -95 dBm typ.
MCU type - ARM Cortex M4

Firmware update - FOTA, over UART

Ranging and positioning
Typ. airtime per ranging cycle - 1.8 ms
Ranging accuracy1 - 1 m
Range - TApp2.: 300-500 m, Cap3.: 1,000 m

Host interface - UART (115 kbps to 1 Mbps)
RF interface - 50 Ohm RF Port
Other - 4x GPIOs, 1x ADC

Electrical data
Supply voltage - 3.3 V to 5.5 V
Current consumption
TX mode, active (+20 dBm) - max. 230 mA
RX mode, active max. 55 mA
Standby mode 6.5 mA
Nap mode max. 20 µA4
Snooze mode max. 3 µA
Deep sleep max. 3 µA

Package and dimensions
Dimensions - 22 mm x 23 mm x 4.4 mm
Weight -4 grams

Environmental and quality
Operating temperature -30°C to +85°C

-- nanotron Technologies product --