MNACOR01 - nanoANQ Embedded RTLS Anchor Module

nanoANQ Embedded RTLS Anchor Module 
Stock: Out of stock
Delivery time: if not in stock: 6 ~ 8 weeks
Article number TOP: MNACOR01
Manufacturer / supplier: nanotron Technologies
Filter A: RF technology: Chirp Spread Spectrum (CSS)
Filter B: Dimensions: 85.6 x 54.0 mm
Datasheet / URL: http://www.nanotron.com/EN/PR_find.php#02

€ 436,00

Quantity 1+
Unit price€ 436,00
Quantity

    Add to wish list
nanoANQ Embedded RTLS Anchor Module; MNACOR01

High throughput location and monitoring solution

The nanoANQ Embedded RTLS Anchor Module can be integrated into any communication substation by interfacing directly with an Ethernet MAC or PHY via RMII. It precisely detects the time of arrival (ToA) and received signal strength (RSSI) of tag blinks required for TDOA location applications. The module is able to range with other embedded anchor modules to automatically determine anchor separation distances – a key capability to enable automatic system set-up and maintenance.

Together with nanoLOC-based tags and nanotron's Location Server, the embedded anchor module forms the basis for high throughput tracking and monitoring applications in harsh environments.
The credit card size design supports antenna through its U.FL connectors for each of the two independent channels.

Through its Ethernet port in utilizes IP-based data and management protocols and features a build-in DHCP configured remotely through its API over the network.
Bidirectional payload exchange between the Location Server and individual tags is supported over the air.


Key Features
RF technology ...................................... Chirp Spread Spectrum (CSS)
Signal detection rate .............................. up to 900 per second
ToA capture accuracy ............................ <1 ns (better than 30 cm)
RF output power .................................. Configurable 0 to +19 dBM
Typical RX sensitivity (80MHz, 1Mbps) ........ -89dBm
Typical RX sensitivity (80MHz, 250kbps) ...... -95dBm
Power supply ...................................... 3.3 V +/- 10%, 0.3 A
Antenna connector ............................... 2x U.FL
Operating temperature range ................... -30 to 65 °C
Data interface ..................................... RMII
Dimensions ......................................... 85.6 x 54.0 mm

Interfaces
Except for the antennas all other signals are connected through a 60 pin connector.

- nanotron Technologies product -